LED Advertising spot light


Modern technology to create competitive light commercial!

LEDs are increasingly used for advertising lighting, and soon may be taking a major position in this field.

Objects of outdoor advertising, which have been successfully applied LEDs:
advertising signboards;
volume illuminated letters;
light boxes, console;
roof installation;
backlight billboards.

Advantages of using LED lighting in the outdoor advertising:
The use of LEDs in advertising signs can significantly reduce operational costs and reduce power consumption. Costs associated with operation of the facility of outdoor advertising, which are often not taken into account, in some cases constitute a significant amount. These costs primarily relate to energy consumption, as well as the maintenance of advertising structures, replacement of lamps, etc. LEDs in the advertising lighting allows 3-4 times lower power consumption and cost of it.
LEDs used in advertising signs, can realize the idea completely, in the absence of adequate power. This possibility arises from the fact that electricity consumption LEDs in times less consumption of electricity fluorescent, halogen lamps and neon.
Long service life. LEDs have not seen the fall of brightness, which is peculiar, for example, neon tubes after 2-3 years of operation as a result of phosphor burn-out and change the properties of the gas. The low percentage of degradation of LEDs enables high brightness for a long time (more than 11 years) operation of the LED signs.
LED advertising - it is bright and attractive. With the help of LEDs can realize the most daring designs, create unique light-dynamic effects in outdoor advertising. These capabilities LEDs help attract customers to stores, visitors to the restaurants, hotels, etc.
Low voltage allows the use of LED backlighting in different situations where high demands of security. LED advertising signs have a high degree of reliability and fire safety.
Dimensions LEDs allow you to use them as a lighting system in small signs, letters, etc. Illuminated letters can be a few inches thinner than the standard methods of manufacture (12 cm - 16 cm - model letter, 9 cm thick enough for the LED backlight).
LEDs save performance in a wide range of temperatures. LED manufacturers recommended operating temperature ranges from -50 in the bottom of the range to 85 - at the top. Lowering the temperature only improves the work of semiconductor devices, which include light emitting diodes. This brightness is preserved, as well as instant start.
The technology of LED lighting is much easier and cheaper in comparison with some classical methods of advertising lights. The cost of LED backlighting with similar consumer characteristics is lower by 10-15% compared with neon, maintenance cost and power consumption is much lower.